Centroid Products
2104 HIBISCUS DR.  -    EDGEWATER, FL   32141
TEL: 386-423-3574   -   FAX:  386-423-3709

COMPUTANK

Computerized Tank Monitoring System
For Fuel, Oil, and Potable Water Tanks
FEATURES :

template

Preliminary -  The CompuTank is shipped with the bezel attached.  Remove the four (4) nuts and washers to remove the bezel.

CompuTank can be installed with or without the bezel depending on your preference or accessibility to the back of the panel.  Normal installation is to use the four screws molded in the bezel to secure the CompuTank to the dash from the rear.  If you have limited access to the back, then you can use self-tapping screws to mount the CompuTank from the front, remove the screws from the bezel and use adhesive or double-sided tape to hold the bezel in place.

Panel cut out - 4 1/2" (11.4 cm) w X 3 5/16" (8.41 cm) high.

Mounting hole - With bezel - use 9/64 drill bit (.13")

Mounting hole - Without bezel - use 7/64 drill bit for #6 self-tapping screws.
Centroid Products Centroid
Products

CompuTank Installation and Operating Instructions
PANEL CUTOUT TEMPLATE
PAGE 1

Centroid Products, Inc.

2104 HIBISCUS DR.  EDGEWATER, FL 32141        -         TEL : 386-423-3574  FAX : 386-423-3709